LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission Servicing) >> Lubrication >> Checking Fluid Level
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking Fluid Level

WARNING: This page is about a different variant/trim than selected.
  1. Drive vehicle for about 20 miles or until it reaches operating temperature 150-170°F (66-77°C). With vehicle on level ground, apply parking brake, and run engine at idle. Shift gear gearshift lever through all ranges, ending in Park.
  2. Fluid level should be in designated areas for operating temperature. See Fig 1 .
  3. Add fluid as necessary. See RECOMMENDED FLUIDS  . DO NOT overfill. Check condition of fluid for contamination and burned smell. Ensure dipstick is fully installed.
Fig 1: Identifying Dipstick Notches
G00119750Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals