Compass Calibration
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Start the vehicle.
- Locate the reset button on top of the compass sensor mounted behind the mirror. Press and hold the reset button on the compass module for approximately 8 seconds until CIRCLE SLOWLY TO CAL is displayed in the message center display.
- Slowly drive the vehicle in a circle no more than 5 times at no more than 5 km/h (3 mph) until CIRCLE SLOWLY TO CAL changes to CALIBRATION COMPLETED in the message center.
- The compass is now calibrated.
NOTE:
For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (rear window defrost, heater A/C, map lamps, wipers, etc.) and make sure all doors are closed.