LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Escape 2.0 B >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specification & Procedures >> Wheel Alignment Procedures >> Toe-In Adjustment >> Front
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Toe-In Adjustment: Front

  1. Start the engine and center the steering wheel. Turn the engine off, and lock the steering wheel in position. Check the toe settings. See WHEEL ALIGNMENT SPECIFICATIONS  .
    2. NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie rod is rotated.
  2. Remove the clamps. See Fig 1 . Clean and lubricate the jam nut(s) and front wheel spindle tie rod threads. Loosen tie rod end jam nuts. Rotate the front wheel spindle tie rods.
  3. Tighten the jam nuts to specification. See TORQUE SPECIFICATIONS  . Install the clamp(s). Recheck the toe settings.
Fig 1: Adjusting Front Toe
G00307358Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals