General Specifications
General Specifications Table
| Item | Specification |
|---|---|
| First gear and differential gear mm (in) | 0.05-0.33 (0.002-0.013) |
| Second gear and secondary third gear mm (in) | 0.18-0.51 (0.007-0.020) |
| Second gear and third gear mm (in) | 0.05-0.25 (0.002-0.010) |
| Fourth gear and bearing cone mm (in) | 0.17-0.42 (0.007-0.017) |
| Clearance | |
| Synchronizer blocking ring to gear mm (in) | 0.8-1.5 (0.031-0.059) |
| First/second synchronizer to shift fork mm (in) | 0.1-0.55 (0.004-0.021) |
| Third/forth synchronizer to shift fork mm (in) | 0.1-0.55 (0.004-0.021) |
| Reverse/fifth synchronizer to shift fork mm (in) | 0.15-0.51 (0.005-0.020) |
| End play | |
| Input shaft mm (in) | 0-0.05 (0-0.002) |
| Output shaft mm (in) | 0-0.05 (0-0.002) |
| Runout | |
| Input shaft gear mm (in) | 0.05 (0.002) |
| Output shaft gear mm (in) | 0.015 (0.0006) |
| Backlash | |
| Side gears and pinions mm (in) | 0.025-0.1 (0.001-0.004) |
| Lubricants and Sealants | |
| SAE 75W90 Gear Oil F32Z-19C547-MA | MAZDA 115A & API GL-4 |
| Premium Long Life Grease XG-1-C or -K | ESA-M1C75-B |
| Silicone Gasket and Sealant F7AZ-19554-EA | WSE-M4G323-A4 |