Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, REFER to FRONT DISPLAY INTERFACE MODULE (FDIM) - FUSION, MILAN or FRONT DISPLAY INTERFACE MODULE (FDIM) - MKZ in this service information.
- Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION -- FUSION MILAN & MKZ article.
- Remove the Front Controls Interface Module (FCIM). For additional information, REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) - MKZ in this service information.
- Remove the 8 screws and the ACM.
- To install, reverse the removal procedure.
NOTE:
Module configuration is required when a new ACM is being installed.
- Download the ACM configuration information from the scan tool. For additional information, refer to PMI in MODULE CONFIGURATION -- FUSION MILAN & MKZ article.