Shift Control Housing: Assembly

WARNING: This page is about a different car, the 2003 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Install the shift gate.

Fig 1: Installing Shift Gate
Courtesy of FORD MOTOR CO.
Assemble the spring and cap assemblies.

Fig 2: Assembling Spring And Cap Assemblies
Courtesy of FORD MOTOR CO.
Position the spring assembly and partially install the shift rod.

Fig 3: Positioning Spring Assembly And Installing Shift Rod
Courtesy of FORD MOTOR CO.
Install the shift cam.

Fig 4: Installing Shift Cam
Courtesy of FORD MOTOR CO.
Install the remaining spring assembly and fully install the shift rod.

Fig 5: Installing Spring Assembly And Install Shift Rod
Courtesy of FORD MOTOR CO.
Install the circlip.

Fig 6: Locating Circlip
Courtesy of FORD MOTOR CO.
Install the circlip.

Fig 7: Installing Circlip
Courtesy of FORD MOTOR CO.
Install a new roll pin.

Fig 8: Installing Roll Pin
Courtesy of FORD MOTOR CO.
If removed, install the shift rod seal.

Fig 9: Locating Shift Rod Seal
Courtesy of FORD MOTOR CO.
Install the shift shaft.
- Install the shift shaft.
- Position the shift pawl.
  
  Fig 10: Locating Shift Shaft
  Courtesy of FORD MOTOR CO.
Install the new roll pin.

Fig 11: Installing New Roll Pin
Courtesy of FORD MOTOR CO.