Powertrain Control Module (PCM) Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
POWERTRAIN CONTROL MODULE (PCM) DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1213 | Anti-Theft Number of Programmed Keys is Below Minimum | PCM | Go To PINPOINT TEST B . |
| B1342 | ECU is Defective | PCM | INSTALL a new PCM. REFER to POWERTRAIN CONTROL MODULE (PCM) for 4.0L or POWERTRAIN CONTROL MODULE (PCM) for 4.6L . |
| B1600 | PATS Key Transponder Signal is Not Received - Damaged Key or Non -PATS Key | PCM | Go To PINPOINT TEST D . |
| B1601 | PATS Received Incorrect Key -Code From Key Transponder (Unprogrammed PATS Key) | PCM | Go To PINPOINT TEST E . |
| B1602 or B2431 | PATS Received Invalid Format of Key-Code From Key Transponder (Partial Key Read) | PCM | Go To PINPOINT TEST F . |
| B1681 | PATS Transceiver Module Signal is Not Received (Damaged, Not Connected, or Damaged Wiring ) | PCM | Go To PINPOINT TEST G . |
| P1260 | PCM Disabled- Vehicle Disabled | PCM | REPAIR the PCM. REFER to INTRODUCTION - CNG, FLEX-FUEL & GASOLINE . |