LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Focus SVT, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 573 (Electronic Engine Controls- Gasoline Engines) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
  3. Disconnect the powertrain control module (PCM) electrical connector.
    Fig 1: Disconnecting Powertrain Control Module (PCM) Electrical Connector
    G02761793Courtesy of FORD MOTOR CO.
  4. Remove the PCM.
    1. Remove the nuts.
    2. Remove the cover.
    3. Remove the PCM.
    Fig 2: Removing PCM
    G02761794Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals