LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Taurus SES, 3.0 2, AX4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 2073 (Cruise Control System) >> Diagnostic Tests >> Speed Control >> Pinpoint Tests >> Pinpoint Test G: Flash Code 2 - Stoplamp Switch Circuit Failure >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

When the speed control actuator carries out the self-test, a voltage signal is sent through circuit CCB08 (VT/WH). Circuit CCB08 (VT/WH) carries the signal to the high mounted stoplamp, which then is routed to ground. If the signal fails to be grounded, flash code 2 is set by the speed control actuator.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals