Quick Connect Coupling: Connection

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Make sure the quick connect coupling clicks into place when installing the tube. To make sure that the tube is fully seated, pull on the tube.

NOTE: Apply clean engine oil to O-rings.

Fig 1: Installing Quick Connect Coupling Onto Tube

Courtesy of FORD MOTOR CO.

Install the tube into the quick connect coupling.
If equipped, install the redundant clip.

Fig 2: Installing Redundant Clip

Courtesy of FORD MOTOR CO.