Spring Lock Couplings: Connect

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Clean and inspect the fuel tube and spring lock coupling.
- Lubricate the end of the fuel tube with clean engine oil.
Install the spring lock coupling onto the fuel tube until fully seated.

Fig 1: Identifying Spring Lock Coupling

Courtesy of FORD MOTOR CO.

Pull on the spring lock coupling to make sure it is correctly locked onto the fuel tube.
Install the safety clip onto the spring lock coupling.

Fig 2: Identifying Safety Clip

Courtesy of FORD MOTOR CO.

Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.