Quick Connect Coupling: Connect

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the quick connect coupling and the tube for damage. Remove any dirt or obstructions.

NOTE: Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.

NOTE: Apply clean engine oil to O-ring seals.

Install the quick connect coupling onto the tube until it is fully seated.

Fig 1: Installing Quick Connect Coupling Onto Tube

Courtesy of FORD MOTOR CO.

Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.