LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Windstar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2128 (Wiper System & Washer System) >> Removal And Installation >> Wiper/Washer Module >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Smart Junction Box (SJB) aside by pushing upward then pulling outward to release it from the SJB  bracket.
  2. Disconnect the wiper/washer module connector.
  3. Pull down on the wiper/washer module to release it from the SJB  bracket.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals