LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Windstar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Handles, Locks, Latches And Entry Systems) >> Diagnosis And Testing >> Locks, Latches and Entry Systems >> Connector Circuit Reference >> Pinpoint Test Q: The Remote Keyless Entry Transmitter Is Out Of Synchronization
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test Q: The Remote Keyless Entry Transmitter Is Out Of Synchronization

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Q1 RESYNCHRONIZE THE INOPERATIVE REMOTE TRANSMITTER 
    • Key in OFF position.
    • Press any button on the inoperative remote transmitter four times consecutively within 30 seconds.
    • Does the remote transmitter operate correctly now? 
    1. Yes  : The system is OK. CLEAR the DTCs. TEST the system for normal operation.
    2. No  : GO to Q2.
  2. Q2 CHECK FOR A SECOND REMOTE TRANSMITTER 
    • Check for another remote transmitter that operates with the vehicle.
    • Is there another remote transmitter that operates with the vehicle? 
    1. Yes  : GO to Q3.
    2. No  : GO to  Q4.
  3. Q3 RESYNCHRONIZE THE INOPERATIVE REMOTE TRANSMITTER USING THE SECOND REMOTE TRANSMITTER 
    • Key in OFF position.
    • Press any button on the operational remote transmitter.
    • Within 30 seconds, press a button on the inoperative remote transmitter.
    • Check the inoperative remote transmitter for correct operation.
    • Does the inoperative remote transmitter operate now? 
    1. Yes  : The system is OK. CLEAR the DTCs. TEST the system for normal operation.
    2. No  : GO to Q4.
  4. Q4 PROGRAM ALL REMOTE TRANSMITTERS 
    • Reprogram the inoperative remote transmitter individually using a diagnostic tool or reprogram all remote transmitters using the manual key cycle method. Refer to REMOTE TRANSMITTER PROGRAMMING .
    • Does the inoperative remote transmitter operate now? 
    1. Yes  : The system is OK. INFORM the customer any remote transmitters not present will need to be reprogrammed. CLEAR the DTCs. TEST the system for normal operation.
    2. No  : To diagnose the inoperative remote transmitter, Go To PINPOINT TEST K .