LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2261 (Vehicle Dynamic Systems) >> Removal And Installation >> Stability Control Sensor Cluster >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the stability control sensor cluster electrical connector.
  2. Remove the 2 stability control sensor cluster bolts.
    • To install, tighten to 6 Nm (53 lb-in).
  3. Remove the stability control sensor cluster.
  4. To install, reverse the removal procedure.
    • Calibrate the ABS module. Follow the scan tool directions.
scientia non olet · About LEMON Manuals