Cooling Module

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATION

Item	Specification
Motorcraft Premium Gold Engine Coolant VC-7A (in Oregon VC-7B)	WSS-M97B51-A1

Drain the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
Recover the A/C refrigerant. For additional information, refer to CLIMATE CONTROL SYSTEM .
Remove the cooling fan. For additional information, refer to refer to RADIATOR, COOLING FAN AND SHROUD .
Remove the parts in the order indicated in the following illustration and table.

Fig 1: Identifying Cooling Module Removing Sequence
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
Fill and bleed the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
Evacuate, leak check and charge the A/C system. For additional information, refer to CLIMATE CONTROL SYSTEM .