Powertrain Control Module (PCM) Diagnostic Trouble Code (DTC) Index

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

POWERTRAIN CONTROL MODULE (PCM) DIAGNOSTIC TROUBLE CODE (DTC) INDEX

DTC	Description	Source	Action
B1213	Anti-theft number of programmed encoded ignition keys below minimum	PCM	Program additional keys. For additional information, refer to KEY PROGRAMMING USING TWO PROGRAMMED KEYS . TEST the system for normal operation.
B2103	Antenna not connected	PCM	Go To PINPOINT TEST A: DTC B2103 ANTENNA NOT CONNECTED .
B1600	No key code received	PCM	Go To PINPOINT TEST B: DTC B1600 NO KEY CODE RECEIVED .
B1601	Incorrect key code received	PCM	Go To PINPOINT TEST C: DTC B1601 INCORRECT KEY CODE RECEIVED .
B1602	Invalid key code format from encoded ignition key transponder	PCM	Go To PINPOINT TEST D: DTC B1602 INVALID KEY CODE FORMAT FROM ENCODED IGNITION KEY TRANSPONDER .
B1681	PATS transceiver signal is not received	PCM	Go To PINPOINT TEST E: DTC B1681 PATS TRANSCEIVER SIGNAL IS NOT RECEIVED .
B2431	Transponder programming failure	PCM	Program an additional key. For additional information, refer to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . TEST the system for normal operation.
B1342	PCM is defective	PCM	INSTALL a new PCM REFER to POWERTRAIN CONTROL MODULE (PCM) . CLEAR the DTCs. REPEAT the self-test.
-	All other DTCs		REFER to MULTIFUNCTION ELECTRONIC MODULE . TEST the system for normal operation.