LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 588 (Suspension System) >> Diagnosis And Testing >> Tire Pressure Monitoring System >> Tire Pressure Monitor System (TPMS) Module Diagnostic Trouble Code (DTC) Index
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tire Pressure Monitor System (TPMS) Module Diagnostic Trouble Code (DTC) Index

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
TIRE PRESSURE MONITOR SYSTEM (DTC) INDEX

DTC Description Source Action
B1342 ECU is Defective TPMS Module INSTALL a new tire pressure monitor module. REFER to TIRE PRESSURE MONITORING SYSTEM MODULE .
B2477 Module Configuration Failure/ Mismatch TPMS Module REFER to MODULE COMMUNICATIONS NETWORK .
B2849 Horn Output Relay Circuit Open TPMS Module Go To PINPOINT TEST D 
B2868 Left Front Tire Pressure Sensor Fault TPMS Module The module has not heard this sensor during the TPMS module removal and installation process. When programming or installing a new TPMS module, the tire pressure sensors must be manually trained. REFER to TIRE PRESSURE MONITORING SYSTEM MODULE .
B2869 Right Front Tire Pressure Sensor Fault TPMS Module The module has not heard this sensor during the TPMS module removal and installation process. When programming or installing a new TPMS module, the tire pressure sensors must be manually trained. REFER to TIRE PRESSURE MONITORING SYSTEM MODULE .
B2870 Right Rear Tire Pressure Sensor Fault TPMS Module The module has not heard this sensor during the TPMS module removal and installation process. When programming or installing a new TPMS module, the tire pressure sensors must be manually trained. REFER to TIRE PRESSURE MONITORING SYSTEM MODULE .
B2871 Left Rear Tire Pressure Sensor Fault TPMS Module The module has not heard this sensor during the TPMS module removal and installation process. When programming or installing a new TPMS module, the tire pressure sensors must be manually trained. REFER to TIRE PRESSURE MONITORING SYSTEM MODULE .
B2872 Tire Pressure Sensor Fault TPMS Module Go To PINPOINT TEST E .
C2780 ECU in Manufacturing Mode TPMS Module The TPMS module is in manufacturing mode and must undergo the removal and installation process. REFER to the steps in TIRE PRESSURE MONITORING SYSTEM MODULE .
U0073 Control Module Communication Bus Off CAN Bus REFER to MODULE COMMUNICATIONS NETWORK
U1900 Missing Message Timeout CAN Bus REFER to MODULE COMMUNICATIONS NETWORK