Specifications Index
CROWN VICTORIA, GRAND MARQUIS & MARAUDER SPECIFICATIONS INDEX
| System | Specification/Procedure | |||
|---|---|---|---|---|
| Air Conditioning - Automatic System | ||||
| Service | SPECIFICATION | |||
| Torque | SPECIFICATIONS | |||
| Battery | SPECIFICATIONS | |||
| Brakes | ||||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | |||
| Disc Brakes | 2004 DISC BRAKE SPECIFICATIONS | |||
| Torque | 2004 DISC BRAKE TORQUE SPECIFICATIONS | |||
| Charging | ||||
| Generator | 2004 GENERATOR SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| Drive Belts | ||||
| Adjustment | BELT ADJUSTMENT | |||
| Belt Routing | DRIVE BELT ROUTING | |||
| Engine Cooling | ||||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | |||
| Radiator Cap Pressure | 16 psi (110 kPa) | |||
| Thermostat R & I | ||||
| 4.6L (2V) | THERMOSTAT -- 4.6L (2V) | |||
| 4.6L (4V) | THERMOSTAT -- 4.6L (4V) | |||
| Water Pump R & I | WATER PUMP | |||
| Engine Mechanical | ||||
| 4.6L (2V) | ||||
| Compression | COMPRESSION TEST -- COMPRESSION GAUGE CHECK | |||
| Oil Pressure | Oil pressure (hot @2500 rpm) 40-70 psi (276-483 kPa) | |||
| Overhaul | GENERAL SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| 4.6L (4V) | ||||
| Compression | COMPRESSION TEST -- COMPRESSION GAUGE CHECK | |||
| Oil Pressure | Oil pressure (hot @1,500 rpm) 20-45 psi (138-310 kPa) | |||
| Overhaul | GENERAL SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button | |||
| Flywheel/Flex Plate Torque | ||||
| 4.6L (2V) | INSTALLATION | |||
| 4.6L (4V) | REMOVAL AND INSTALLATION | |||
| Fuel System | ||||
| Fuel Filter Location | Under vehicle behind right rear door, mounted in a worm clamp. | |||
| Fuel Filter R & I | REMOVAL AND INSTALLATION | |||
| Pressure Release Procedure | FUEL SYSTEM PRESSURE RELEASE | |||
| Pressure Specification | FUEL PRESSURE SPECIFICATIONS | |||
| Fuel Pressure Test Procedure | A: No Start STEP A10 CHECK THE FUEL PRESSURE | |||
| Ignition | ||||
| Firing Order & Cylinder Identification | ||||
| 4.6L (2V) | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| 4.6L (4V) | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| Ignition Coil (Cylinder Identification) | ||||
| 4.6L (2V) & 4.6L (4V) | Coil On Plug | |||
| Ignition Wires (Routing) | ||||
| 4.6L (2V) & 4.6L (4V) | N/A | |||
| Spark Plugs | ||||
| 4.6L (2V) | ||||
| Type | Motorcraft AWSF-32PM | |||
| Gap | 0.052-0.056 In. (1.32-1.42 mm) | |||
| Torque | 11 Ft. Lbs. (15 N.m) | |||
| 4.6L (4V) | ||||
| Type | Motorcraft AWSF-32EM | |||
| Gap | 0.052-0.056 In. (1.32-1.42 mm) | |||
| Torque | 11 Ft. Lbs. (15 N.m) | |||
| Starting | ||||
| Starter | STARTER SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| Wheel Alignment | ||||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | |||
| Torque Specifications | TORQUE SPECIFICATIONS | |||
| Wheel & Tire | ||||
| Wheel Lug Nut Torque | 95 Ft. Lbs. (129 N.m) | |||