Torque Specifications Chart
TORQUE SPECIFICATIONS CHART
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brush and terminal holder (6.0L) | 3 | - | 27 |
| Brush and terminal holder retaining screws | 2.8-4.0 | - | 25-35 |
| Generator B+ terminal nut (6.0L) | 8 | - | 71 |
| Generator B+ terminal nut (4.6L, 5.4L, and 6.8L) | 7-9 | - | 62-80 |
| Generator bottom mounting bolts (4.6L, 5.4L, and 6.8L) | 25 | 18 | - |
| Generator mounting mounting bolts/stud bolts (6.0L) | 47 | 35 | - |
| Generator mounting bolts (4.6L, 5.4L, and 6.8L) | 22 | 16-21 | - |
| Generator regulator and brushes mounting screws | 2.3-3.4 | - | 20-30 |
| Generator top bracket mounting bolts (4.6L, 5.4L, and 6.8L) | 10 | - | 89 |
| Ground strap | 8 | - | 71 |
| Manifold absolute pressure (MAP) bracket screws | 5 | - | 44 |
| Oil filler neck bracket screw | 2 | - | 18 |
| Power steering reservoir bracket screws | 8 | - | 71 |
| Pulley nut | 82-135 | 61-99 | - |
| Turbo-to-air cooler pipe bracket screws | 2 | - | 18 |
| Turbo-to-air cooler pipe bracket stud nut and bolt | 25 | 18 | - |
| Turbo-to-air cooler pipe clamps (6.0L) | 12 | 9 | - |
| Upper intake plenum to generator bracket bolts (4.6L, 5.4L, and 6.8L) | 9-12 | - | 80-106 |
| Wiring harness conduit screws | 2 | - | 18 |
| Voltage regulator | 4 | - | 35 |