General Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Lubricants and Sealants | |
| SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP | WSS-M2C153-H |
| Silicone Gasket and Sealant F7AZ-19554-EA | WSE-M4G323-A4 |
| Stud and Bearing Mount E0AZ-19554-BA | WSK-M2G349-A1 |
| Gasket Maker F8AZ-19B508-AB | WSK-M2G348-A5 |
| Engine | |
| Displacement | 2.0L (121 cubic inches) |
| Number of cylinders | 4 |
| Bore | 84.8 mm (3.34 in) |
| Stroke | 88.0 mm (3.46 in) |
| Firing order | 1-3-4-2 |
| Oil pressure (hot 4,000 rpm) | 370-550 kPa (54-80 psi) |
| Oil capacity (with filter) | 4.25 L (4.5 qts) |
| Compression ratio | 9.6:1 |
| Cylinder Head and Valve Train | |
| Cylinder head gasket surface flatness | 0.05/0.520/076 150 x 150 |
| Combustion chamber volume | - |
| Valve arrangement (front to rear) | - |
| Valve clearance - intake | 0.11-0.18 mm (0.004331-0.007087 in) |
| Valve clearance - exhaust | 0.27-0.34 mm (0.0106299-0.0133858 in) |
| Valve guide bore diameter (insert counterbore diameter) | 6.06 mm (0.23858 in) |
| Valve stem diameter | 6.03 mm (0.23740 in) |
| Valve stem-to-guide clearance | 0.017-0.064 mm (0.000662-0.0025196 in) |
| Valve head diameter - intake | 32.0 mm (1.2598 in) |
| Valve head diameter - exhaust | 28.0 mm (1.10236 in) |
| Valve face runout | 0.035 mm (0.0013779 in) |
| Valve face angle | 45 degrees |
| Valve seat width | - |
| Valve seat runout | - |
| Valve seat angle | - |
| Valve spring free length | 43.2 mm (1.701 in) |
| Valve spring squareness | - |
| Valve spring compression pressure - intake | 365 N (82.1 lb) @ 25.1 mm (0.988 in) |
| Valve spring compression pressure - exhaust | 422 N (94.94 lb) @ 26.1 mm (1.0275 in) |
| Valve spring installed height | 34.2 mm (1.346 in) |
| Valve spring installed pressure | - |
| Roller follower ratio | - |
| Camshaft | |
| Theoretical valve lift @ 0 lash - intake | 9.254 mm (0.3643 in) |
| Theoretical valve lift @ 0 lash - exhaust | 8.6 mm (0.33858 in) |
| Lobe lift - intake | 8.9 mm (0.3504 in) |
| Lobe lift - exhaust | 8.7 mm (0.3425 in) |
| Allowable lobe lift loss | - |
| Journal diameter | 25.960-25.980 mm (1.0221-1.0227 in) |
| Camshaft journal bore inside diameter | - |
| Camshaft journal-to-bearing clearance | - |
| Runout | - |
| End play | 0.080-0.220 mm (0.00315-0.00866 in) |
| Cylinder Block | |
| Cylinder bore diameter - standard | 84.807-84.823 mm (3.3389-3.3395 in) |
| Cylinder bore diameter - oversize | 85.060-85.070 mm (3.3488-3.3492 in) |
| Cylinder bore maximum taper | +0.025 mm (0.0009842 in)-0.013 mm (0.0005118 in) max. |
| Cylinder bore maximum out-of-round | 0.025 mm (0.0009842 in) max. |
| Main bearing bore inside diameter (bearing caps installed) | 58.011 -58.0380 mm (2.28389-2.284956 in) |
| Main bearing bore inside diameter (bearing caps installed) - bearing caps graded by size | 58.008-58.031 mm (2.2837749-2.284680 in) |
| Head gasket surface flatness | - |
| Crankshaft | |
| Main bearing journal diameter | 57.980-58.000 mm (2.2826726-2.28346 in) |
| Main bearing journal maximum taper | - |
| Main bearing journal maximum out-of-round | - |
| Main bearing journal-to-cylinder block clearance | - |
| Connecting rod journal diameter | 46.89-46.91 mm (1.846059-1.850036 in) |
| Connecting rod journal maximum taper | - |
| Connecting rod journal maximum out-of-round | - |
| Crankshaft maximum end play | 0.09-0.26 mm (0.0035433-0.010236 in) |
| Piston and Connecting Rod | |
| Piston diameter - standard | 84.758-84.772 mm (3.3369-3.3375 in) |
| Piston diameter - oversize | 85.008-85.022 mm (3.3468-3.3473 in) |
| Piston-to-cylinder bore clearance | 0.035-0.065 mm (0.0014-0.0025 in) |
| Piston Ring End Gap | |
| Piston ring groove width - upper compression ring | 1.484 mm (0.058425 in) |
| Piston ring groove width - lower compression ring | 1.734 mm (0.0682675 in) |
| Piston ring groove width - oil control ring | 2.905 mm (1.1143698 in) |
| Piston ring width - upper and lower compression ring | 0.30-0.50 mm (0.011811 -0.019685 in) |
| Piston ring width - oil control ring | 0.40-1.40 mm (0.015748-0.055118 in) |
| Piston ring-to-groove clearance | - |
| Piston Pin Bore Diameter | |
| Piston pin diameter - white | 20.662-20.625 mm (0.8134629-0.8120062 in) |
| Piston pin diameter - red | 20.625-20.628 mm (0.8120062-0.8121243 in) |
| Piston pin diameter - blue | 20.628-20.631 mm (0.8121243-0.8122424 in) |
| Piston pin length | 63.00-63.80 mm (2.48031 -2.51181 in) |
| Piston pin-to-piston fit | 0.010-0.015 mm (0.0003937-0.0005905 in) |
| Piston-to-connecting rod clearance | 0.016-0.049 mm (0.0006299-0.0019291 in) |
| Connecting rod-to-pin clearance | - |
| Connecting rod pin bore diameter | 20.589-20.609 mm (0.810589-0.811376 in) |
| Connecting rod length | - |
| Connecting rod maximum allowed bend | - |
| Connecting rod maximum allowed twist | - |
| Connecting rod bearing bore diameter | 46.89-46.91 mm (1.846059-1.846847 in) |
| Connecting rod bearing-to-crankshaft clearance | 0.016-0.070 mm (0.0006299-0.0027559 in) |
| Connecting rod side clearance | - |