Quick Release Coupling -R-Clip: Connect

WARNING: This page is about a different car, the 2003 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Clean and inspect the fitting and the tube for damage. Remove any foreign material or obstructions.
Insert the R-clip into the fitting.

Fig 1: Inserting R-Clip Into Fitting
Courtesy of FORD MOTOR CO.
Align the tube and the fitting.

Fig 2: Aligning Tube And Fitting
Courtesy of FORD MOTOR CO.
Insert the tube in the fitting and push together until a click is heard.

Fig 3: Inserting Tube In Fitting
Courtesy of FORD MOTOR CO.
Pull on the connection to make sure it is fully engaged.

Fig 4: Pulling On Connection
Courtesy of FORD MOTOR CO.
Connect the battery ground cable. For additional information refer to BATTERY, MOUNTING AND CABLES .