General Specifications Table

Item	Specification
First gear and differential gear mm (in)	0.05-0.33 (0.002-0.013)
Second gear and secondary third gear mm (in)	0.18-0.51 (0.007-0.020)
Second gear and third gear mm (in)	0.05-0.25 (0.002-0.010)
Fourth gear and bearing cone mm (in)	0.17-0.42 (0.007-0.017)
Clearance
Synchronizer blocking ring to gear mm (in)	0.8-1.5 (0.031-0.059)
First/second synchronizer to shift fork mm (in)	0.1-0.55 (0.004-0.021)
Third/forth synchronizer to shift fork mm (in)	0.1-0.55 (0.004-0.021)
Reverse/fifth synchronizer to shift fork mm (in)	0.15-0.51 (0.005-0.020)
End play
Input shaft mm (in)	0-0.05 (0-0.002)
Output shaft mm (in)	0-0.05 (0-0.002)
Runout
Input shaft gear mm (in)	0.05 (0.002)
Output shaft gear mm (in)	0.015 (0.0006)
Backlash
Side gears and pinions mm (in)	0.025-0.1 (0.001-0.004)
Lubricants and Sealants
SAE 75W90 Gear Oil F32Z-19C547-MA	MAZDA 115A& API GL-4
Premium Long Life Grease XG-1-C or -K	ESA-M1C75-B
Silicone Gasket and Sealant F7AZ-19554-EA	WSE-M4G323-A4