LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Excursion 5.4 L, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Engine - 4.6L And 5.4L) >> Disassembly And Assembly Of Subassemblies >> Intake Manifold Assembly - 4.6L >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Manifold Assembly - 4.6L: Disassembly

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
  1. Remove the 4 fuel rail stud bolts.
    2. NOTE: When removing the fuel rail, leave the fuel injectors in the intake manifold. This will make removal of the fuel rail easier.
  2. Separate the fuel rail from the fuel injectors and remove the fuel rail.
  3. Remove fuel injectors.
    • Discard the O-ring seals.
scientia non olet · About LEMON Manuals