Speaker Walk-Around Test: Notes
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To enter the speaker walk-around test or audio unit self-diagnostic mode, the audio unit must be turned on and in radio tuner mode (AM/FM).
- To enter the speaker walk-around test, simultaneously press the audio unit preset buttons 3 and 6.
- The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1 - 2 seconds. Each speaker is tested and displayed on, the audio unit in the following sequence: RF, LF, LR, RR, and SUBWOOFER.
- To exit the speaker walk-around test, turn the ignition switch off, turn the audio unit off, or press preset button 1 for DIA.