Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Remove the LH and RH floor console finish moldings. For additional information, refer to CONSOLE - FLOOR, MKZ .
Remove the instrument panel finish molding. For additional information, refer to INSTRUMENT PANEL - EXPLODED VIEW .
Remove the 4 screws and the Front Controls Interface Module (FCIM).
- Disconnect the electrical connectors.
  
  Fig 1: Identifying FCIM Electrical Connectors
  Courtesy of FORD MOTOR CO.
Remove the 8 screws and separate the Audio Control Module (ACM) from the FCIM .
To install, reverse the removal procedure.