LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1902 (VIN - Identification Codes) >> Description And Operation >> Identification Codes >> Vehicle Certification (VC) Codes >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vehicle Certification (VC) Codes: Notes

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle Certification (VC) Label Locator 

Fig 1: Locating Vehicle Certification (VC) Label Locator
G06269364Courtesy of FORD MOTOR CO.

The upper portion of the Vehicle Certification (VC) label contains the manufacturer's name, the month and year of manufacture, the certification statement and the Vehicle Identification Number (VIN). It also includes Gross Vehicle Weight Rating (GVWR). The VC  label is located on the LH door jamb.

If a vehicle requires replacement of the VC  label and is 4 years old or less, an authorized dealer must submit the VIN  to their respective regional office. The regional office will submit a web form to the assembly plant for the replacement label. Once the label has been printed, a representative from the regional office will deliver the label to the dealer and witness installation on the vehicle. If a vehicle is more than 4 years old and requires a replacement label, the dealer must submit a request to the Department of Motor Vehicles.

Fig 2: Identifying Vehicle Certification (VC) Label Description
G06269365Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Description
1 Exterior paint code
2 Region code
3 District Special Order (DSO)
4 Interior trim code
5 Tape/paint stripe code
6 Radio code
7 Axle code
8 Transmission code
9 Spring code
10 Powertrain calibration information

Exterior Paint 

Fig 3: Locating Vehicle Certification (VC) Label - Exterior Paint
G06261156Courtesy of FORD MOTOR CO.

Exterior paint codes may be listed as a 2-part code. The first set of characters identify the primary body color. The second set of characters (if applicable) identify the vehicle accent or 2-tone body color. All colors are base coat/clear coat.

Exterior Color Codes 

Interior Trim 

Fig 4: Locating Vehicle Certification (VC) Label - Interior Trim
G06269367Courtesy of FORD MOTOR CO.

Interior trim codes are listed as a 2-part code. The first character identifies the interior trim type. The second character identifies the interior trim color.

Interior Trim Type 

Interior Trim Color 

Tape/Paint Stripe 

Fig 5: Locating Vehicle Certification (VC) Label - Tape/Paint Stripe
G06261158Courtesy of FORD MOTOR CO.

Tape and paint stripe codes do not apply.

Radio Type 

Fig 6: Locating Vehicle Certification (VC) Label - Radio Type
G06072745Courtesy of FORD MOTOR CO.

Axle Ratio Codes 

Fig 7: Locating Vehicle Certification (VC) Label - Axle Ratio Codes
G06261160Courtesy of FORD MOTOR CO.

The axle ratios are:

Transmission Type 

Fig 8: Locating Vehicle Certification (VC) Label - Transmission Type
G06261161Courtesy of FORD MOTOR CO.

Refer to the transmission tag information in AUTOMATIC TRANSAXLE/TRANSMISSION - AISIN AW21 , AUTOMATIC TRANSAXLE/TRANSMISSION - 6F35 , AUTOMATIC TRANSAXLE/TRANSMISSION - ELECTONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT) or MANUAL TRANSAXLE/TRANSMISSION AND CLUTCH - GENERAL INFORMATION .

Spring Code 

Fig 9: Locating Vehicle Certification (VC) Label - Spring Code
G06072748Courtesy of FORD MOTOR CO.

Spring codes are listed as a 2-part code. The first 2 characters identify the front springs. Characters 3 and 4 identify the rear springs. Front spring base part number is 5310, rear spring base part number is 5560.

Powertrain Calibration Information 

Fig 10: Locating Vehicle Certification (VC) Label - Powertrain Calibration Information
G06261163Courtesy of FORD MOTOR CO.
NOTE: Powertrain calibration information is limited to a maximum of 5 characters per line on the Vehicle Certification (VC) label. Because of this, calibration identification consisting of more than 5 characters will wrap to the second line on the VC  label.

Powertrain calibration information is printed in the lower right corner of the VC  label. Only base calibration information is printed. Revision levels will not appear, however, they can be obtained through a scan tool using the most current software revision.