Steering Gear - Power: Notes
Courtesy of FORD MOTOR CO.
- Remove the steering gear. For additional information, refer to STEERING GEAR - 4X2 or STEERING GEAR - 4X4 .
- Position the steering gear in a soft-jawed vice.
- Make marks to index the tie-rods end and jam nuts for reference during installation.
- Loosen the jam nuts and remove the tie-rod ends.
- Remove and discard the jam nuts.
Courtesy of FORD MOTOR CO.
- Remove the clamps and the bellows boots.
Courtesy of FORD MOTOR CO.
- While holding the steering gear rack, remove and discard the tie-rods.
Courtesy of FORD MOTOR CO.