Torque Specifications
WARNING: This page is about a different car, the 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Differential pinion shaft lock bolt | 30 | 22 | - |
| Differential pinion bearing preload (used pinion bearings) | 0.9--1.5 | - | 8--14 |
| Differential pinion bearing preload (new pinion bearings) | 1.8--3.3 | - | 16--29 |
| Differential housing cover bolt | 45 | 33 | - |
| Fill plug | 30 | 22 | - |
| Handle for Pinion Depth Gauge | 2.2 | - | 20 |
| Differential bearing cap bolt | 105 | 77 | - |
| Differential ring gear bolt | 105 | 77 | - |
| Upper control arm nut | 103 | 76 | - |
| Lower control arm nut | 150 | 111 | - |
| Shock absorber nut | 90 | 66 | - |
| Bellcrank stud nut | 250 | 185 | - |
| Rear stabilizer bar bolt | 25 | 18 | - |
| Rear stabilizer bar link | 20 | 15 | - |
| Anti-lock sensor | 6 | - | 53 |
| Driveshaft bolt | 112 | 83 | - |
| Nut for Differential Clutch Setting Gauge | 6.7 | - | 60 |
| Initial minimum breakaway torque, Traction-Lok® | 27 | 20 | - |
| Differential housing vent | 18 | 13 | - |
| Bellcrank stud | 258 | 191 | - |