LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Explorer 4.6 W, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 650 (Engine System-General Information) >> General Procedures >> Sprockets
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Procedures: Sprockets

WARNING: This page is about a different car, the 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING: To avoid the possibility of personal injury or damage to the vehicle, do not operate the engine with the hood open until the fan blade has been examined for possible cracks and separation.
    NOTE: Specifications show the expected minimum or maximum condition. Refer to the specification chart in ENGINE 4.6L 2V or ENGINE 4.6L 4V .
    NOTE: If a component fails to meet the specifications, it is necessary to install a new component or refinish. If the component can be refinished, wear limits are provided as an aid to making a decision. A new component must be installed for any component that fails to meet specifications and cannot be refinished.
  1. Inspect the timing chain/belt and the sprockets.
    • Install new components as necessary. Refer to ENGINE 4.6L 2V or ENGINE 4.6L 4V .
      Fig 1: Inspecting Timing Chain/Belt And Sprockets
      G03453762Courtesy of FORD MOTOR CO.