LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Explorer Sport Trac 4D Utility >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Adjustments >> Digital Transmission Range Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Digital Transmission Range Sensor

  1. Raise and support vehicle. Disconnect manual shift control cable. Disconnect Digital Transmission Range (DTR) sensor harness connector. Remove manual control lever nut. Remove manual control lever. Loosen DTR sensor bolts.
  2. Manual shift lever must be in Neutral. Using DTR sensor Alignment Tool (T97L-70010-A), align DTR sensor slots. Tighten DTR sensor bolts evenly. Tightening one screw before tightening the other may cause the sensor to bind or become damaged. Install manual shaft outer nut. Tighten fasteners to specification. See TORQUE SPECIFICATIONS  . Connect shift lever control cable. Connect DTR harness connector. Verify that the shift cable is adjusted correctly.
scientia non olet · About LEMON Manuals