Audio Units Without Navigation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the audio unit on.
- Press and hold preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
- Before the speaker walk-around test is complete, press preset button 6.
- Press the TUNE UP button.
- Record the audio unit part number.
- Turn the audio unit off.
NOTE:
This step will cause the audio unit to auto-scroll through configuration 1, configuration 2, EEPROM number, and audio unit part number.
NOTE:
Step 4 may need to be repeated until the audio unit part number can be recorded.