Blower Motor Switch Resistor

The heater blower motor switch resistor has the following features:

• The assembly is located on the passenger side of the plenum assembly behind the glove compartment (06010).
• Three resistance elements are mounted on the resistor board to provide four A/C blower motor speeds.
• Depending on the heater blower motor switch position, series resistance is added or bypassed in the A/C blower motor speed.
• An overheating protective device (thermal limiter) will open the resistor coil circuit when the temperature reaches 105°-110°C (221°-230°F), interrupting the blower motor operation in all speeds except HI.
• The thermal limiter cannot be reset and is not serviceable.