LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Mustang Base, 2D Convertible, 3.8 4, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Control Components >> Removal And Installation >> Control Assembly >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Control Assembly: Removal

  1. Remove the center instrument panel register. For additional information, refer to AIR DISTRIBUTION & FILTERING .
  2. Remove the screws.
    Fig 1: Removing Control Head Screws
    G03242472Courtesy of FORD MOTOR CO.
  3. Disconnect the connectors.
    Fig 2: Disconnecting Control Head Connectors
    G03242473Courtesy of FORD MOTOR CO.
  4. Using the special tool, disconnect the temperature control cable from the control head.
    Fig 3: Disconnecting Temperature Control Cable
    G03242474Courtesy of FORD MOTOR CO.
  5. Remove the nuts and disconnect the vacuum connector.
    Fig 4: Disconnecting Vacuum Connector
    G03242475Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals