Component testing procedure
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
POWER SEAT SWITCH, 6-WAY POWER SEAT - COMPONENT TESTING TABLE
| Circuit to test | Connect self powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Forward/Rearward circuit | 4 and 3 6 and 2 |
Forward | Closed circuit |
| Closed circuit | |||
| 4 and 6 3 and 2 |
Rearward | Closed circuit | |
| Closed circuit | |||
| Front up/down circuit | 4 and 7 5 and 2 |
Up | Closed circuit |
| Closed circuit | |||
| 4 and 5 7 and 2 |
Down | Closed circuit | |
| Closed circuit | |||
| Rear up/down circuit | 4 and 8 1 and 2 |
Up | Closed circuit |
| Closed circuit | |||
| 1 and 4 8 and 2 |
Down | Closed circuit | |
| Closed circuit |