Removal and Installation

WARNING: This page is about a different car, the 2003 Lincoln Navigator and 2003 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .

NOTE: The module is accessed with the seat fully in the UP position.

Fig 1: Sliding Driver Seat Module

Courtesy of FORD MOTOR CO.

Slide the driver seat module forward to remove from bracket.
Disconnect the connectors and remove the DSM.

Fig 2: Disconnecting Connectors
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.