LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Crown Victoria Special Edition >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Control System - General Information >> Diagnosis And Testing >> Climate Control System >> Electronic Automatic Temperature Control Module Self-Test >> Electronic Automatic Temperature Control (EATC) Module Diagnostic Trouble Code (DTC) Index
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Automatic Temperature Control (EATC) Module Diagnostic Trouble Code (DTC) Index

ELECTRONIC AUTOMATIC TEMPERATURE CONTROL MODULE DIAGNOSTIC TROUBLE CODE INDEX

DTC EATC (Hard) Self-Test Faults EATC (Intermittent) Run-Time Faults Description Action to Take
B1249 024 025 Blend door short or failure GO to PINPOINT TEST A .
B1251 031 N/A In-car temperature sensor open circuit GO to PINPOINT TEST B .
B1253 030 N/A In-car temperature sensor short to ground GO to PINPOINT TEST B .
B1255 041 043 Ambient temperature sensor open circuit GO to PINPOINT TEST C .
B1257 040 042 Ambient temperature sensor short to ground GO to PINPOINT TEST C .
B1260 053 051 A/C solar radiation sensor open circuit GO to PINPOINT TEST D .
B1261 050 052 Solar radiation sensor circuit short to ground GO to PINPOINT TEST D .
U1073 N/A N/A SCP invalid or missing data for engine coolant If DTCs are present in the instrument cluster, diagnose those codes first. Clear the DTCs. If the EATC DTC returns, INSTALL a new EATC module. Refer to AIR DISTRIBUTION AND FILTERING . TEST the system for normal operation. If no DTCs are present in the instrument cluster, clear the DTCs. If the EATC DTC returns, INSTALL a new EATC module. Refer to AIR DISTRIBUTION AND FILTERING . TEST the system for normal operation.
U1341 N/A N/A SCP invalid or missing data for function read vehicle speed If DTCs are present in the instrument cluster, diagnose those codes first. Clear the DTCs. If the EATC DTC returns, INSTALL a new EATC module. Refer to AIR DISTRIBUTION AND FILTERING . TEST the system for normal operation. If no DTCs are present in the instrument cluster, clear the DTCs. If the EATC DTC returns, INSTALL a new EATC module. Refer to AIR DISTRIBUTION AND FILTERING . TEST the system for normal operation.