LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Cutaway 6.0 P >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Door System - Handles, Locks, Latches And Entry Systems >> Diagnosis And Testing >> Locks, Latches and Entry Systems - Module Controlled >> Pinpoint Tests >> Pinpoint Test K: The Remote Keyless Entry Transmitter Is Out Of Synchronization
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test K: The Remote Keyless Entry Transmitter Is Out Of Synchronization

NOTE: All the RKE transmitters must be present to begin diagnosis of the RKE system.
  1. K1 RESYNCHRONIZE THE INOPERATIVE RKE TRANSMITTER 
    • Key in OFF position.
    • Press any button on the inoperative RKE transmitter 4 times consecutively within 30 seconds.
    • Does the remote transmitter operate correctly now? 
    • Yes  : The system is OK. CLEAR the DTCs. TEST the system for normal operation.
    • No  : GO to K2.
  2. K2 CHECK FOR A SECOND RKE TRANSMITTER 
    • Check for another RKE transmitter that operates with the vehicle.
    • Is there another RKE transmitter that operates with the vehicle? 
    • Yes  : GO to K3.
    • No  : GO to  K4.
  3. K3 RESYNCHRONIZE THE INOPERATIVE RKE TRANSMITTER USING THE SECOND RKE TRANSMITTER 
    • Key in OFF position.
    • Press any button on the operational RKE transmitter.
    • Within 30 seconds, press a button on the inoperative RKE transmitter.
    • Check the inoperative RKE transmitter for correct operation.
    • Does the inoperative RKE transmitter now operate? 
    • Yes  : The system is OK. CLEAR the DTCs. TEST the system for normal operation.
    • No  : GO to K4.
  4. K4 PROGRAM THE INOPERATIVE RKE TRANSMITTER OR ALL THE RKE TRANSMITTERS 
    • Program the inoperative RKE transmitter individually using a diagnostic tool, or program all the RKE transmitters using the manual key cycle method. Refer to REMOTE TRANSMITTER PROGRAMMING .
    • Does the inoperative RKE transmitter now operate? 
    • Yes  : The system is OK. INFORM the customer that any RKE transmitters not present need to be programmed. CLEAR the DTCs. TEST the system for normal operation.
    • No  : To diagnose the inoperative RKE transmitter, GO to PINPOINT TEST I .
scientia non olet · About LEMON Manuals