LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Escape Base, 2.3 Z, FWD, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Diagnosis And Testing >> Speed Control >> Pinpoint Tests >> Pinpoint Test G: Flash Code 2 - Stoplamp Switch Circuit Failure >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

When the speed control actuator carries out the self-test, a voltage signal is sent through circuit 511 (LG). Circuit 511 (LG) carries the signal to the stoplamp bulbs, which then is routed to ground. If the signal fails to be grounded, flash code 2 is set by the speed control actuator.

scientia non olet · About LEMON Manuals