Anti-Lock Brake System (ABS) Module Diagnostic Trouble Code (DTC) Index
ANTI-LOCK BRAKE SYSTEM MODULE (DTC) INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1342 | ECU is Defective | ABS Module |
NOTE:
If other DTCs are present, REPAIR them before installing a new component. CLEAR the DTCs. RETRIEVE the DTCs. If DTC B1342 is retrieved, INSTALL a new ABS module. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . REPEAT the self-test. |
| B1676 | Battery Pack Voltage Out of Range | ABS Module | GO to PINPOINT TEST B . |
| B2477 | Module Configuration Failure | ABS Module | Follow the diagnostic tool directions for the configuration procedure. |
| B2900 | VIN Mismatched | ABS Module | VERIFY that the module has the correct as-built data. |
| C1095 | ABS Hydraulic Pump Motor Circuit Failure | ABS Module | GO to PINPOINT TEST C . |
| C1145 | Wheel Speed Sensor RF Input Circuit Failure | ABS Module | GO to PINPOINT TEST D . |
| C1155 | Wheel Speed Sensor LF Input Circuit Failure | ABS Module | GO to PINPOINT TEST D . |
| C1165 | Wheel Speed Sensor RR Input Circuit Failure | ABS Module | GO to PINPOINT TEST D . |
| C1175 | Wheel Speed Sensor LR Input Circuit Failure | ABS Module | GO to PINPOINT TEST D . |
| C1233 | Wheel Speed Sensor LF Input Signal Missing | ABS Module | GO to PINPOINT TEST E . |
| C1234 | Wheel Speed Sensor RF Input Signal Missing | ABS Module | GO to PINPOINT TEST E . |
| C1235 | Wheel Speed Sensor RR Input Signal Missing | ABS Module | GO to PINPOINT TEST E . |
| C1236 | Wheel Speed Sensor LR Input Signal Missing | ABS Module | GO to PINPOINT TEST E . |
| U1900 | CAN Communication Bus Fault-Receive Error | Network Fault | MODULE COMMUNICATIONS NETWORK . |
| U2023 | Fault received from external node | Network Fault | MODULE COMMUNICATIONS NETWORK . |