DTC P0602: Control Module Programming Error
P0602 - CONTROL MODULE PROGRAMMING ERROR
| Description: | This DTC indicates a programming error within the vehicle ID (VID) block. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Using the diagnostic tool, reprogram the VID block. If the PCM does not allow reprogramming of the VID block, reflashing the PCM is required. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | The Vehicle ID (VID) Block must reprogrammed. For instructions, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . | ||