Connecting Rod, Engine

Connecting rod-to-pin clearance 0.009 - 0.023 mm (0.0004 - 0.0093 inch)
Connecting rod pin bore diameter 22.024 - 22.012 mm (0.8671 - 0.8666 inch)
Connecting rod length (centerline bore-to-bore) 169.1 mm (6.6575 inch)
Connecting rod maximum allowed bend + 0.762 mm (+ 0.03 inch)
Connecting rod maximum allowed twist + 1.27 mm (+ 0.04 inch)
Connecting rod bearing bore diameter (with assembled liners) 53.049 - 53.027 mm (2.0885 - 2.0877 inch)
Connecting rod bearing-to-crankshaft clearance 0.064 - 0.026 mm (0.0025 - 0.0010 inch)
Connecting rod side clearance 0.475 - 0.125 mm (0.0187 - 0.0049 inch).

Connecting Rod Bolts






Stage 1: Tighten to 43 Nm (32 ft. lbs.).
Stage 2: Tighten an additional 105 degrees.