LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Excursion 5.4 L, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Warning System >> Removal And Installation >> Switch - Key-In-Ignition Warning >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Switch - Key-In-Ignition Warning: Removal

  1. Remove the ignition switch lock cylinder.
    1. Insert the ignition key and turn to the RUN position.
    2. Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
    Fig 1: Removing Ignition Switch Lock Cylinder
    G03916201Courtesy of FORD MOTOR CO.
  2. Remove the key-in-ignition warning switch.
    1. Pry the clip downward.
    2. Release the key-in-ignition warning switch from the rear of the ignition switch lock cylinder.
    Fig 2: Removing Key-In-Ignition Warning Switch
    G03910792Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals