General Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Fluid Using a transmission fluid that indicates a dual usage (MERCON® and MERCON® V) in a transmission application requiring only MERCON®, may cause transmission damage. Use of any fluid other than the recommended fluid may cause transmission damage. Refer to the fluid level indicator and the Owner's Guide for the type of transmission fluid required. Some fluid labels may indicate dual usage such as MERCON® and MERCON® V. These dual-usage fluids are not to be used in transmissions that use only the MERCON® type fluid. These dual-usage fluids may be used in transmissions that require MERCON® V use. |
|
| MERCON® Multi-Purpose (ATF) Transmission Fluid X-2-QDX | MERCON® |
| Fluid Capacities | |
| The above fluid capacities are approximate dry fill capacity and include fluid coolers and fluid cooler tubes. Fluid level indicator should be used to determine actual fluid requirement and fluid specifications. Check level at operating temperature. DO NOT OVERFILL. The transmission fluid should be changed every 30,000 miles (48,000 km) regardless of normal or special operating conditions. 5.4L applications with in-tank coolers and OTA may require an additional few ounces. | |
| 20 plate oil-to-air cooler | 16.1L (17.1 quarts) |
| 26 plate oil-to-air cooler | 16.7L (17.7 quarts) |
| Fluid Filter | |
| In-line Transmission Fluid Filter Kit XC3Z-7B155-AA | - |
| In-line Transmission Fluid Filter XC3Z-7B155-BA | - |
| Lubricants | |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3 | ESE-M1C171-A |
| Multi-Purpose Grease XG4 | ESR-M1C159-A |