Torque Specifications Chart
TORQUE SPECIFICATIONS CHART
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Center support fluid feed bolt (two rear) | 16 | 12 | - |
| Cooler bypass valve (CBV) fitting to case (front) | 30 | 22 | - |
| Cooler bypass valve (CBV) fitting to case (rear) | 37 | 27 | - |
| Cooler line fitting to CBV (front and rear) | 27 | 20 | - |
| Control assembly to pump | 27 | 20 | - |
| Torque converter drain plug | 12 | 9 | - |
| Extension housing to case | 27 | 20 | - |
| Transmission insulator and retainer-to-case | 94 | 69 | - |
| Transmission insulator and retainer-to-crossmember (rear mount) | 94 | 69 | - |
| Torque converter-to-flexplate nut | 35 | 26 | - |
| Inner manual valve detent lever nut | 47 | 35 | - |
| Low/reverse OWC inner race to case | 29 | 21 | - |
| Line pressure to case - plug | 12 | 9 | - |
| Main and lower control body to case | 10 | - | 89 |
| Main accumulator and solenoid body to case | 10 | - | 89 |
| Digital transmission range sensor | 9 | - | 80 |
| Intermediate/overdrive cylinder fluid feed bolt (front) | 16 | 12 | - |
| Transmission pan to case | 15 | 11 | - |
| Pump body to case | 27 | 20 | - |
| Parking pawl abutment to case | 25 | 18 | - |
| Parking rod guide plate to case | 25 | 18 | - |
| Manual control valve detent lever spring to case | 10 | - | 89 |
| Reinforcing plate to case | 10 | - | 89 |
| Stator support to pump body | 10 | - | 89 |
| Transmission to engine | 47 | 35 | - |
| Transmission support crossmember-to-frame | 81 | 60 | - |
| Output shaft speed (OSS) sensor | 9 | - | 80 |
| Turbine shaft speed (TSS) sensor | 9 | - | 80 |