LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Expedition 4WD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Removal And Installation >> Lumbar Control Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Lumbar Control Switch: Installation

  1. Install the power lumbar switch into the side shield.
    Fig 1: Installing Power Lumbar Switch Into Side Shield
    G03931904Courtesy of FORD MOTOR CO.
  2. Connect the 8-way power seat and power lumbar switch electrical connectors.
    Fig 2: Connecting 8-Way Power Seat And Power Lumbar Switch Electrical Connectors
    G03931905Courtesy of FORD MOTOR CO.
  3. Push to install the three side shield retainers onto the seat frame.
    Fig 3: Installing Side Shield Retainers Onto Seat Frame
    G03931906Courtesy of FORD MOTOR CO.
  4. Access and install the front side shield screw.
    Fig 4: Installing Front Side Shield Screw
    G03932025Courtesy of FORD MOTOR CO.
  5. Install the 40 percent seat and repower the SRS. For additional information, refer to FRONT SEAT - 40 PERCENT .
scientia non olet · About LEMON Manuals