LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Expedition 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 443 (Electronic Engine Control System) >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Installation

WARNING: This page is about a different car, the 2006 Lincoln Navigator and 2006 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. If necessary, install the PCM bracket and 3 bolts.
    • Tighten to 10 N.m (89 lb-in).
  2. Install the PCM and 4 bolts.
    • Tighten to 7 N.m (62 lb-in).
  3. Connect the PCM electrical connectors.
  4. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
  5. Reprogram the passive anti-theft system (PATS). Carry out the Key Programming Using Two Programmed Keys procedure. For additional information, refer to KEY PROGRAMMING USING TWO PROGRAMMED KEYS .
scientia non olet · About LEMON Manuals