Powertrain Control Module (PCM): Removal
WARNING: This page is about a different car, the 2006 Lincoln Navigator and 2006 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
- Disconnect the PCM connectors.
- Remove the 4 bolts and the PCM.
- If necessary, remove the 3 bolts and the PCM bracket.
NOTE:
Any powertrain control module (PCM) replacement will require that ALL customer keys are available to be programmed at the time of installation. PCM replacement DOES NOT require new keys.