Window Control Switch: Removal
- Lift up on the center console armrest.
- Remove the center console window control switch panel.
- Remove the pin-type retainer.
- Disconnect the electrical connectors and remove the window control switch.
- Release the locking tabs.
- Remove the window control switch panel.
- Disconnect the electrical connector(s) and remove the window control switch.
- Release the locking tabs.
- Remove the rear door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Remove the window control switch from the door trim panel.
- To install, reverse removal procedure.
Navigator front
Expedition front and Expedition passenger rear
NOTE:
Driver side Expedition shown, all others similar.
Navigator passenger rear
All vehicles