LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Focus ZX4 SES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 963 (Cruise Control System) >> Diagnostic Tests >> Speed Control >> Pinpoint Tests >> Pinpoint Test F: Flash Code 1 - Flash With Last Switch Pressed, But No Dynamic Pull Occurs At The Throttle And The Speed Control Is Inoperative >> Pinpoint Test F: Flash Code 1 - Flash With Last Switch Pressed, But No Dynamic Pull Occurs At The Throttle And The Speed Control Is Inoperative
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test F: Flash Code 1 - Flash With Last Switch Pressed, But No Dynamic Pull Occurs At The Throttle And The Speed Control Is Inoperative

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. F1 CHECK THE SPEED CONTROL CABLE 
    • Check the speed control cable for correct attachment at the speed control actuator and throttle body.
    • Is the speed control cable attached correctly? 
    1. YES  : Go to  F2.
    2. NO  : CONNECT the speed control cable. TEST the system for normal operation.
  2. F2 CHECK FOR A STICKING OR BINDING SPEED CONTROL CABLE 
    • Check the speed control cable for sticking or binding.
    • Is the speed control cable OK? 
    1. YES  : INSTALL a new speed control actuator. REFER to Speed Control Actuator . TEST the system for normal operation.
    2. NO  : REPAIR or INSTALL a new speed control cable. REFER to Speed Control Cable . TEST the system for normal operation.
scientia non olet · About LEMON Manuals